Fingerprint sampling and engravings

You were looking for a special piece of jewelry with a personal touch.

And finally, you chose fingerprint jewelry? You made the right choice!

Jewelry engraved with the fingerprint of a loved one

Instantly becomes a piece of jewelry with unique meaning and high sentimental value.

Fingerprint engravings - the different methods:

1 LASER ENGRAVINGS SERVICES

The most accurate and fastest recommended option!

Taking a clear home sample with a pencil and tape

Send us the image on WhatsApp for review and approval.

(If necessary, computer processing is performed to clean the image from background noise)

2) SPECIAL WAX

Order wax on site for sampling.

The wax is heated slightly and the imprint is embedded.

Then they send the wax back to us.

There is an option to order wax collection.

By courier from home/office,

For this option, contact us on WhatsApp.

recommendation-

The shipping days for the wax must be taken into account

So if you're not in a hurry, this option is cheap,

And gives an accurate result!

3) Handmade engravings under microscope

The service is available for any fingerprint jewelry on the site.

No additional cost!

The imprint is engraved by a professional engraver.

Under a microscope and special equipment.

The service is high quality and gives impressive results!

*Not sure which method to choose?

Contact us on WhatsApp for quick advice!

If you have a picture of your fingerprint - send it to us for review and recommendation accordingly!

So how do you take a fingerprint sample?

1) Capture your fingerprint on your mobile phone

Focus and close-up photography,

Only suitable for those with a quality camera.

3)3) Take a home sample with the pencil and tape method

For this method you will need three things:

Pencil + white paper + transparent tape.

The pencil and tape method

Steps for fingerprint sampling:

1) On a sheet of white paper, draw a rectangle and color it well with the pencil.

2) Rub the rectangle with the pad of your finger until it turns gray.

3) Gently stick a piece of transparent tape on the middle of the pad of your finger.

Make sure the tape sticks smoothly and does not wrinkle

4) Remove the tape and stick it well on the white sheet.

5) Take a close-up photo of the sample and in focus

and send it to us on WhatsApp

to 052-770-4488

Please include your full name and order number.

Important tips:

*It is recommended to repeat these actions at least 3 times,

So that there are different samples, and we can choose the best one.

*When it comes

*Note that you stuck the tape on the center of the finger pad = the vortex,

This is important - because it is the most interesting and unique area of the fingerprint.

And what is the next step:

We will check the validity of the fingerprints you sent us,

And if necessary, we will clarify/emphasize the impressions.

In the event that the fingerprint lines are not clear enough even after computer processing,

We will ask you to take another sample.

Recommendations and tips:

The waxing method is the most accurate - if you have time, choose this option.

But if you are short on time, the other methods will suit you.

Using methods based on image engraving

The accuracy depends on the quality of the sample and the image you send us,

If the sampling is successful and accurate, so will the final result.

We transfer the selected embedding lines

On the jewelry and engraved by hand under a microscope

Or using a laser - depending on what you choose.

With all methods we make sure the engraving is deep enough.

So that future generations will also be able to clearly see the fingerprint.

Photo tutorial: